By resisting dry soil, less soil sticks to the carpet, therefore it is picked up by your vacuum or cleaning. Making sure that you have a sufficient amount of protector on your carpet will help keep the soil from sticking to the carpet. Once it sticks to the carpet, it acts like sandpaper on your traffic area. Once the traffic area yarns are broken down, there is no way to bring them back to their original state.

2 primary ways that factory protector is removed from a carpet
1. Regular foot traffic. Over a period of 6 - 18 months depending on the traffic, a significant amount of protector can be removed from your traffic areas and needs to be reapplied.

2. High alkaline cleaner. Uneducated and sometimes downright unscrupulous carpet cleaners use harsh chemicals on the carpet that will strip it’s protection.

If one of these rascals has been in your home, you may want to have the carpet re-cleaned and re-protected soon, as those harsh chemicals left in the carpet may do more harm than good.

4 Mistakes Other Cleaners Make In Applying Protector
1.Not using high quality protector. Discount protectors are not as effective and sometimes void the warranty of the carpet.

Our Company uses only the highest quality, recommended protectors.

2.Not using a dedicated container. Using the same container for carpet protector as other cleaning solutions can contaminate the carpet protector making it gummy and ineffective.

Our truck has a dedicated container reserved ONLY for carpet protector.

3.Not applying the product properly. Some techs either under apply or over apply the protector. Under applying it doesn’t allow for complete penetration on the carpet yarns. Over applying it causes the carpet to become overly stiff and crusty. Our Company is diligent about proper application.

We dislike having to mention this… but some companies have been known to spray down plain water in order to make more money. It is hard to tell, but you can always ask your technician to show you the chemical prior to application.

If you are having Teflon or Scotchgard applied, it should be a milky-white (in color) solution and if it is a solvent protector, it is clear though you will be able to tell by the feel. Solvent will be very thin and dry up very quickly.

4.Not grooming the carpet. For the best performance on pile carpet, the product should be groomed into the carpet fiber for maximum penetration. This ensures contact with all surfaces of the carpet yarn and proper distribution and drying.

Our Company thoroughly grooms the protector into the carpet pile.

5 Reasons You Should Always Get Carpet Protector
1. Reduces permanent stains
A great looking carpet can be ruined by an ugly spot. Unprotected carpet doesn’t repel spillage as well as protected carpet. Being able to remove spots and spills more effectively, you can avoid permanent staining.

2. Helps save your traffic areas from becoming destroyed
Traffic area soil is very abrasive and cuts carpet yarns like a knife. This damaging soil can easily bond to an unprotected carpet. By applying protector, you will increase the life of your carpet dramatically. When you vacuum your protected carpet the soils will release from the carpet pile much more effectively.

3. Make spots easier to remove
The easier a spot is to remove, the less cleaning solution you will have to use. The less agitation you will have to use, and the less time it will take. Many spots can be removed easily with just soft water.

4.  Makes your next professional cleaning more effective
Having protector applied to your carpet will enhance your next cleaning. More soil will be removed the next time your carpeting is professionally cleaned.

5. Helps avoid costly service calls
Although you want to call us out to handle any spot you cannot remove immediately, carpet protector helps you remove more spots than you could without protector. You may be able to save a minimum charge by removing the spot yourself.

The result of having protector applied to your carpet is that your carpet will look better and last longer.

Two different types of protectors exist today.
Water-based protectors (Dupont Teflon, 3M Scotchguard and several after-market protectors) and solvent protectors exist.

Our solvent protector is non-odorous and very safe.

We offer you a choice…
between *Dupont Teflon or our custom created (by a leading chemist) *Solvent based protector.(non-odorous and very safe)
*Ask your technician for a quote on either choice.

Protectors like solvent based…

which we at really clean like to use and stand behind (non-odorous and very safe) are a better alternative to water-based protectors.

First, they tend to speed up the drying time as a solvent does not mix with water.

Second, they have much better protective results due to solvent protectors actually penetrating into the entire fiber rather than sitting on top of the fiber as do water-based protectants.

We Highly Recommend Protecting Your Investment!